Zaram XGS-PON ONU SFP+

The Zaram XGSPON-STICK is "Embedded XGSPON-MAC Optical Network Terminal (ONT)" with Small Form-factor Pluggable(SFP+) packaging. This module is suited to setup a XGS-PON connection with Delta or KPN's XGS-PON Fiber Network.

The Zaram ONT ZXOS11NPI is an XGS-PON SFP ONT, an Optical Network Termination solution for mobile backhaul and midhaul or enterprise applications where network synchronization and operational efficiency are key requirements. With its smallest possible footprint, low power consumption and complete feature set, it enables operators to leverage fiber PON (Passive Optical Networks) for more revenues and very efficient transport of backhaul and midhaul mobile traffic. For best synchronization performance this ONT supports IEEE1588v2 requirement.

Short Instructions for Delta/KPN XGS-PON setup
- Please note: Use PON-ID code ZRMTxxxxxxxx (and not ZarmCNxxxxxxxx) to activate.
- This SFP-module requires a SC/UPC (blue) connector (see accessories).
Note: Please read our full article on the setup for Delta/KPN for additional information.

Specifications

1. Low Power Consumption SFP+ Formfactor with Embedded ZX300 SoC
2. Compliant with standard SFP+ form factor SFF-8431, SFF-8472, GR-468
3. XGS-PON uplink, G.9807 series and G.988 GPON OMCI compliant
4. Very low power consumption, typically less than 2W
5. SFF-8472 DDM
6. Class N1/N2
7. APD Receiver : -28.5dBm
8. 1270nm DFB Burst Laser
9. Commercial/Industrial Temperature
10. IEEE 1588, ToD, SyncE Support(Only EPI supports SyncE)
11. 10G XFI Interface

With symmetric XGS-PON uplink The Zaram ONTZXOS11NPI provide 10-Gigabit Ethernet (10 GigE) service to any device capable of hosting this SFP, such as Ethernet switches, routers, access nodes, customer premises equipment (CPE) or mobile stations. It is designed for mission critical services where space and power are paramount, while still supporting a full feature set. This SFP ONT can be used to connect cell sites or enterprises to transport traffic over PON network in plug-and-play mode. This industrial temperature range SFP ONT is fully hardened for indoor and protected outdoor installations, allowing diverse deployment possibilities.

The Zaram ONT ZXOS11NPI is compliant with the ITU-T G.9807.1 XGS-PON specification. It supports 9.953 Gb/s downstream and upstream at a physical layer rate and time-of-day synchronization functions. It is compliant with the standard PON definitions for configuration, management, performance, security and monitoring functions.

Hardware

Main Chip:	ZARAM SoC (ZX300)
Flash Memory:	Embedded 256Mbit (Serial Flash*1)
Memory:	Embedded 512Mbit, LPDDR@ SDRAM *2
Wavelength:	1577nm Downstream, 1270nm Upstream
Uplink Interface:	10 GPON port (SC/UPC, SFP compliant interface)
Service Interface:	SFP+ Compatible SERDES Interface

Environment Conditions

Input power:	Single 3.3V, SFP+ Compatible
Power Consumption:	Max 2.00W (Meets SFP+ Power Class Level III)
Operation temperature/ humidity:	-40C~85C / 5%~95% (relative humidity)
Storage temperature:	-40° C~85° C

Product Standards

Type:	XGSPON ONU in SFP MSA Footprint
MAC:	Integrated XGSPON ITU-T G.09807, 989 MAC
Standards:	ITU-T G.989.x-compliant NGPON2 TC sublayer ITU-T G.9807.x-compliant XGSPON TC sublayer Complies with ITU-T G.988 OMCI 9.95328Gbps 1260~1280nm Burst Mode Transmitter 9.95328Gbps 1575~1580nm Continuous Mode Receiver Meets MSA specification of 2.0Watt Typical Power Consumption ~ 1.95Watt XFI interface operation at 10 Gbps Digital diagnostic monitor interface compatible with SFF-8472 Compliant with SFP MSA INF-8074i

Package content

Zaram SFP+ ONU Module

Note: This SFP-module requires a SC/UPC (blue) connector (see accessories) to connect with KPN/Delta XGS-PON network.

Datasheet	Datasheet	Product Brief_ZXOS11NPI.pdf
Manual	Product guide	ZXOS11NPI_XGSPON_product guide(Zaram)_rev2.2_20230127.pdf